Vietnam's 6GHz band new regulations land! Effective in 2027, please pay attention to related wireless equipment companies!

On November 30th, 2025, the Ministry of Science and Technology of Vietnam issued the National Technical Specification QCVN136: 2025/BHCN-About Wireless Access Equipment in 6GHz Band, which will take effect on January 1st, 2027, when the original standard QCVN 47:2015/BTTTT will no longer be applicable. This technical specification aims to establish a unified technical requirement and test method system for wireless access systems (WAS/RLAN, excluding narrowband equipment) operating in the 6 GHz band (5945 MHz to 6425 MHz), so as to promote the effective sharing and utilization of spectrum resources.

Main technical requirements of the new regulations

1, equipment classification and management

◆ Low-power indoor equipment (LPI): limited and fixed for indoor use, not for outdoor scenes;

◆ Very Low Power Equipment (VLP): It supports indoor and outdoor use, especially suitable for outdoor short-distance direct communication applications.

2. RF output power limitation

According to the equipment type (LPI or VLP) and the frequency band used, the maximum equivalent omnidirectional radiation power (EIRP) limit is specified. For example, in the frequency band of 5945-6425 MHz, the limit of LPI equipment is 23 dBm；; The limit value of VLP equipment is 14 dBm, which should be strictly controlled and not exceeded.

3, power spectral density (PSD) limit

◆ The limit of average EIRP power spectral density is specified.

◆ Additional requirements for frequency hopping and duty cycle (less than 1/15) are put forward for VLP narrowband (NB) equipment with PSD exceeding 1 dBm/MHz.

4, transmitter stray emission specification

The unwanted emission limits and measurement methods of equipment in out-of-band, stray domain and 6 GHz band are specified in detail, and the spectrum emission template is introduced for specification.

5. Channel Access Mechanism (LBT)

It is mandatory for equipment to adopt the mechanism of "listening before speaking", and further defines the parameters and process requirements of channel detection, occupied time (COT) and competition window of the following two types of equipment:

◆ Frame-based equipment (FBE);

◆ Load-based equipment (LBE);

6. Receiver performance

The receiver blocking characteristics and adjacent channel selectivity requirements are specified to ensure the basic receiving performance of the equipment in the interference environment.

7. User access restrictions

It is required to lock the configuration of key parameters (such as the relevant threshold of channel access mechanism and the antenna integration of LPI AP/ bridge) in hardware or software to prevent the equipment from not meeting the technical specifications due to modification by end users.

Influence of new regulations on enterprises

1. Market entry threshold is improved: After January 1, 2027, all 6GHz wireless access devices entering the Vietnamese market must meet the QCVN 136:2025/BKHCN standard. Products that fail the compliance test will be prohibited from production, sale and use, and compliance will become a "necessary pass" for enterprises to enter the Vietnamese market.

2. The pressure of technology upgrading appears: The new regulations conform to the global technology development trend of Wi-Fi 6E/7, and put forward higher requirements for equipment power control, anti-interference ability, channel access mechanism, etc. Enterprises need to optimize product design in a targeted manner to avoid being eliminated by the market because the technology is not up to standard.

3. Testing and certification need to be laid out in advance: the effective time of the new regulations is less than one year ago, and enterprises need to reserve sufficient product rectification, testing and certification cycles to avoid the loopholes in the compliance process caused by rushing to work, which will affect the market launch progress.

Warm tips

The implementation of the new regulations of QCVN 136:2025/BKHCN is both a challenge and an opportunity. Enterprises that complete the compliance layout ahead of schedule will take the lead in seizing market share. If your enterprise is planning to enter the Vietnamese market, or needs to know the specific testing items and compliance timetable of the new regulations, please feel free to contact us, and our engineers will serve you as soon as possible! Our company has a professional technical team and rich experience in product testing, which can help enterprises enter the target market in compliance and avoid delays in customs clearance or certification.