Information required for WiFi module RED certification

The Wi-Fi module, also known as the serial port Wi-Fi module, belongs to the transmission layer of the Internet of Things. Its function is to convert the serial port or TTL level into an embedded module that conforms to the Wi-Fi wireless network communication standard. The built-in wireless network protocol IEEE802.11b. Protocol stack and TCP/IP protocol stack. Nowadays, the wireless network is very developed, and there are wireless networks everywhere, and the export of this WiFi module to the EU area also needs to apply for CE-RED certification.

Before wireless products can be legally sold in EU countries, they must be tested and approved according to the RED directive, and they must also have the CE-mark. Wireless remote control products must comply with the RED directive RED 2014/53/EU requirements. According to the new EU Framework Resolution 768/2008/EC, the RED Directive also clearly stipulates the responsibilities of manufacturers, importers, distributors and EU representatives. On the product or accompanying instructions, the name of the manufacturer and importer and the address that can be contacted must be identified.

Information required for WiFi module RED certification

1. Certification application form

2. Product prototype

3. English manual

4. Circuit schematic

5. List of key components and corresponding certificates or specifications

6. Other required information

RED certification process for WiFi module

Step 1: Apply

1. Fill in the application form

2. Apply for company information form

3. Provide product information and send samples

Step 2: Quotation

According to the provided information, the engineer determines the test standard, test time and corresponding cost

Step 3: Payment

After the applicant confirms the quotation, sign the application form and service agreement and make payment

Step 4: Test

The laboratory conducts a full set of tests on the applied products according to the relevant EU testing standards

Step 5: The test is passed and the report is complete

Step 6: The project is completed and CE certificate is issued

Step 7: Products are sold on the EU market

If you need to apply for WiFi module RED certification, please contact our company ZRLK, we will provide you with professional and efficient testing and certification services, with favorable prices and good service. If you provide us with product pictures and specifications, we will give us the corresponding cycle, quotation and specific plan according to your product. Welcome to inquire!