EU CE certification RF test report processing process——ZRLK

CE certification provides a unified technical specification for the trade of products from various countries in the European market and simplifies the trade procedure. To enter the EU and the European Free Trade Area, the products of any country must be CE certified, and the CE mark should be affixed to the product. Therefore, CE certification is a passport for products to enter the European Union and European Free Trade Zone countries.

The "CE" mark is a safety certification mark and is regarded as a passport for manufacturers to open and enter the European market. CE stands for Conformite Europeenne. In the EU market, the "CE" mark is a mandatory certification mark. Whether it is a product produced by an enterprise within the EU or a product produced in other countries, in order to circulate freely in the EU market, the "CE" mark must be affixed to indicate that the product Comply with the basic requirements of the EU Directive on New Approaches to Technical Harmonization and Standardization. This is a mandatory requirement for products under EU law.

EU CE certification RF test report test project

1. EMC: Also known as electromagnetic compatibility, the test standard is EN301 489-1/-17

2. RF: Bluetooth test, the standard is EN300328

3. LVD: safety test, the standard is EN60950

Information to be prepared for EU CE certification RF test report application

1. Product instruction manual;

2. Product technical conditions (or enterprise standards), establish technical data;

3. The electrical schematic diagram, circuit diagram and block diagram of the product;

4. List of key components or raw materials (please choose products with European certification marks);

5. Copies of the whole machine or components;

6. Other required information.

EU CE certification RF test report processing process

1. Fill in the application form, provide product pictures and material list, and determine the directives and harmonized standards that the product complies with.

2. Determine the detailed requirements that the product should meet.

3. Prepare the test sample.

4. Test the product and check its compliance.

5. Draft and save the technical documents required by the directive.

6. After the test is passed, the report is completed, the project is completed, and the CE certification report is issued.

7. Affix CE mark and make EC declaration of conformity.

For the EU CE certification RF test report, please contact our company ZRLK, we will provide you with professional and efficient testing and certification services, price concessions, and considerate service. If you provide us with product pictures and specifications, we will give you corresponding cycles, quotations and specific solutions according to your products. You are welcome to inquire!